Unit 1 Array Physics 9th Class Punjab MCQ Tests
9th Class Physics Unit 1 MCQ Tests
Unit 1 of 9th Class Physics has 35 questions. If you take an online MCQ test, the system will randomly choose the questions. If you want to take the quiz by chapter then click the start test button.
Total Questions: 35
Total Marks: 35
Time: 35 Mins
Total Questions: 35
Total Marks: 35
Time: 35 Mins
35Min : 00 Sec Remaining
Question # 1
Which one among the digital and mechanical stopwatch gives more precise measurement of time?
Question # 2
If you are not able to understand or do a part of experiment, what should you do?
Question # 3
Vernier callipers can measure length of an accuracy
Question # 4
How many readings need to be taken to compute average time
Question # 5
Question # 6
Convert 1000 picometer into metres.
Question # 7
In which of the following values, all the zeros are significant?
Leading zeros (zeros before the first non-zero digit) are not significant.
Question # 8
Prefixes are multiples of decimals of
Question # 9
A single system on which all scientists all over world agree for units of measurement is called
Question # 10
Which of the following has the least value?
Question # 11
Which of the following physical quantity unit is same for all systems?
Many units are expressed different in physical unit systems, e.g., the basic unit of length in Imperial system is yard which is equivalent to 0.9144 m (In SI unit system).
Question # 12
What is the final result of rounding 8360095 upto 3 significant figures?
Question # 13
Write 24,000,000,000 in scientific notation:
Question # 14
Which is the most common instrument used in laboratories to measure length?
A meter rule of length 1m is equal to 100 cm, whereas a half meter rule is equal to 50 cms. A measuring tape is a flexible ruler and used to measure distance over 100m
Question # 15
Derived quantities can be expressed in form of
Question # 16
Write in standard notation.
Question # 17
The dimensions of a cube are 9 cm, 6.1 cm and 8.2 cm. What is the volume of the cube after rounding it to 4 significant figures?
Question # 18
While measuring cylinder,it must be kept
Question # 19
A physical quantity consists of a
Question # 20
Pick the list representing values in ascending order from left to right
Question # 21
how many characteristics a physical quantity possesses?
Question # 22
An instrument which gives a level of high accuracy than mechanical watch is
Question # 23
Significant figures in 0.00580 are
Question # 24
While measuring length eye must be kept
Question # 25
Add 0.69 g and 0.0003 g, to the correct value of significant figures.
Without following proper rule, adding 0.69 g and 0.0003 g gives 0.6903.
Question # 26
If least count of vernier calipers is 0.01 cm, find the reading of vernier calipers.
Question # 27
Astrophysics is a branch of physics, which deals with
Question # 28
Which of the following has 3 significant figures?
Question # 29
Scales used in screw guage are
Question # 30
The number of base units in SI are
Question # 31
Which of the following is the scientific notation of 0.6743?
Question # 32
At which position of the pointer, the lever balance is balanced and we get the value of mass of the substance?
Question # 33
Why was platinum-Iridium used to make standard of mass?
Such material should be used to make standard of mass, whose physical quality minimises surface contamination and enhances the mass stability of the artefact.
Question # 34
Which of the following qualities is related to the extend to which an instrument can measure a minimum length?
Question # 35
Unit for density is
Total Questions
1234567891011121314151617181920212223242526272829303132333435
Question # 1
Which one among the digital and mechanical stopwatch gives more precise measurement of time?
Question # 2
If you are not able to understand or do a part of experiment, what should you do?
Question # 3
Vernier callipers can measure length of an accuracy
Question # 4
How many readings need to be taken to compute average time
Question # 5
Question # 6
Convert 1000 picometer into metres.
Question # 7
In which of the following values, all the zeros are significant?
Leading zeros (zeros before the first non-zero digit) are not significant.
Question # 8
Prefixes are multiples of decimals of
Question # 9
A single system on which all scientists all over world agree for units of measurement is called
Question # 10
Which of the following has the least value?
Question # 11
Which of the following physical quantity unit is same for all systems?
Many units are expressed different in physical unit systems, e.g., the basic unit of length in Imperial system is yard which is equivalent to 0.9144 m (In SI unit system).
Question # 12
What is the final result of rounding 8360095 upto 3 significant figures?
Question # 13
Write 24,000,000,000 in scientific notation:
Question # 14
Which is the most common instrument used in laboratories to measure length?
A meter rule of length 1m is equal to 100 cm, whereas a half meter rule is equal to 50 cms. A measuring tape is a flexible ruler and used to measure distance over 100m
Question # 15
Derived quantities can be expressed in form of
Question # 16
Write in standard notation.
Question # 17
The dimensions of a cube are 9 cm, 6.1 cm and 8.2 cm. What is the volume of the cube after rounding it to 4 significant figures?
Question # 18
While measuring cylinder,it must be kept
Question # 19
A physical quantity consists of a
Question # 20
Pick the list representing values in ascending order from left to right
Question # 21
how many characteristics a physical quantity possesses?
Question # 22
An instrument which gives a level of high accuracy than mechanical watch is
Question # 23
Significant figures in 0.00580 are
Question # 24
While measuring length eye must be kept
Question # 25
Add 0.69 g and 0.0003 g, to the correct value of significant figures.
Without following proper rule, adding 0.69 g and 0.0003 g gives 0.6903.
Question # 26
If least count of vernier calipers is 0.01 cm, find the reading of vernier calipers.
Question # 27
Astrophysics is a branch of physics, which deals with
Question # 28
Which of the following has 3 significant figures?
Question # 29
Scales used in screw guage are
Question # 30
The number of base units in SI are
Question # 31
Which of the following is the scientific notation of 0.6743?
Question # 32
At which position of the pointer, the lever balance is balanced and we get the value of mass of the substance?
Question # 33
Why was platinum-Iridium used to make standard of mass?
Such material should be used to make standard of mass, whose physical quality minimises surface contamination and enhances the mass stability of the artefact.
Question # 34
Which of the following qualities is related to the extend to which an instrument can measure a minimum length?
Question # 35
Unit for density is
Total Questions
1234567891011121314151617181920212223242526272829303132333435
Physics MCQ Test by Topics
- +1.1 Introduction to Physics
- +1.2 Physical Quantities
- +1.2 Based Quantities
- +1.2 Derived Quantities
- +1.3 International System of Units
- +1.3 Base Units
- +1.3 Derived Units
- +1.4 Prefixes
- +1.5 Scientific Notation
- +1.6 Measuring Instruments
- +1.6 The Meter Rules
- +1.6 The Measuring Tape
- +1.6 Vernier Calipers
- +1.6 Working of a vernier Callipers
- +1.6 Zero Error and Zero Correction
- +1.6 Taking a reading on Vernier Callipers
- +1.6 Screw Gauge
- +1.6 Working of a Screw Gauge
- +1.6 Zero Error
- +1.6 Mass Measuring Instruments
- +1.6 Physical Balance
- +1.6 Lever Balance
- +1.6 Electronic Balance
- +1.6 Stop Watch
- +1.6 How to use a stopwatch
- +1.6 Measuring Cylinder
- +1.6 How to use a measuring Cylinder
- +1.6 Measuring volume of an irregular shaped solid
- +1.7 Significant Figures
Physics
9th Class Online Classes 2026
Updated on: 02-09-2026
9th Class Online Preparation
9th Class 2026 Online
9th Class 2026
Add a Comment
Comments will be shown after admin approval.
Spam comments will not be approved at all.
Matric Result 2026 Punjab
10th Class Result 2026 Punjab
9th Class Result 2026 Punjab Boards
10th Class Result Gazette 2026 Punjab
Punjab Past Papers Matric 9th 10th
Primary Results 5th & 8th Class
BISE Results Intermediate & Matric
BISE Punjab Boards
Sindh Educational Boards
KPK Examination Boards
Technical Boards
Public Service Commission
University Results Gruaduation, Masters Classes
Subscribe by Email
Subscribe by Email
Subscribe to Rss Feed
Position Holders Matric 2026
Position Holders 9th Class 2026
Position Holders Inter 2026
Position Holders 11th Class 2026
Punjab 9th Class Physics